Advertising sun umbrella, tent disassembly considerations
Outdoor advertising umbrellas are divided into advertising tents and advertising umbrellas, tents are also promotional tents, four-legged tents, outdoor tents, etc., advertising umbrellas are also called promotional advertising umbrellas, outdoor advertising sun umbrellas. In the transportation of advertising tents and advertising umbrellas, due to the large size, the ribs are easy to bend, so the advertising umbrella factory will carefully package when sending the logistics, customers need to pay attention to the following matters when receiving the advertising tent disassembly...
1. Take care when loading and unloading the advertising tent. Don't lose it.
2, the package should be opened, do not blindly use a knife to scrape, easy to cause the tarpaulin to be scratched.
3, when the code is placed, it should be erected, do not stack, in order to prevent the top of the cloth from accidentally crushing and tearing.
4. Before using the advertising tent, check whether the screws on the cross pipe are tight.
5. When any of the brackets of the advertising tent is found to be bent or deformed, it should be stopped immediately for maintenance, and the operation can be continued after the troubleshooting.
6. When the advertising tent is used for outdoor display operation, special attention should be paid to wind protection. When the watcher temporarily leaves, the foot of the advertising tent should be lowered to the section. That is: the inner leg is retracted into the outer leg, thus effectively preventing the damage of the wind. .
7. When several tents are operated in tandem, the tent legs that are adjacent to the advertising tent and the advertising tent should be tied with a tie or rope to make it a whole to enhance its wind resistance.
8. Do not wrap the tape when the two tent legs are tied, otherwise the residue of the tape will seriously affect the up and down sliding of the sleeve on the foot of the advertising tent.